Chipper Bodies

Indiana Motor Trucks sells Alum-Line & Monroe Custom Bodies Chipper Bodies. Whether you need an Aluminum, Steel & Galvanneal. IMT can also outfit your chipper body with a dump system for ease of unloading.

chipper-body-3 chipper-body-4 chipper-body-5 chipper-body-6alum-line-chipper-body-1alum-line-chipper-body-2alum-line-chipper-body-3alum-line-chipper-body-4alum-line-chipper-body-5

Monroe Custom Bodies Standard Features
* Side, Front, and Roof Panels: 12 Ga. Galvanneal Steel
* Sides Reinforced with Formed 12 Ga. Galvanneal Ribs on interior
* Floor: 10 Ga. Smooth Galvanneal Steel
   Floor is coved 45 degrees at both streetside and curbside
*  STAINLESS STEEL construction available
* Underframe:
   3″ Structural Channel Crossmembers  –  7″ Structural Channel Longsills
* Top and bottom coves are punched with Vents
* Rear Opening formed with 10 Ga. Galvanneal with 1/4″ Plate Gussets
  Structural Tubing Reinforcement for Boom Support is Optional
* Rear Skirting:  10 Ga. Formed Galvanneal Steel, punched for Recessed Lights
* Tailgate:  Tubing Framed with Solid 12 Ga. Galvanneal Steel Panel
   Hinges are fitted with Grease Fittings  –  Positive Bar Latching
    Tailgate swings 270 degrees, with Pin Hold-Back provided on curbside
* Undercoating
* Urethane Primer

Alum-Line Standard Features/Specifications

Main Construction Standard Feature Option
All aluminum construction Yes
1/2″ Thick extruded aluminum main frame Yes
3″ I-beam crossmembers .190 thick on 16″ centers Yes
3″ I-beam crossmembers .190 thick on 12″ centers Yes
10″ .125 Diamond plate rear light skirt with angled gussets Yes
16″ .125 Diamond plate rear light skirt with angled gussets Yes
Heavy duty 6″ channel mounting sills .250 thick Yes
1″ x 2″ Tubular constructed tapered headache rack with open window Yes
2″ x 2″ Tubular constructed tapered headache rack with open window Yes
Tapered corners or notch-outs Yes
Popular Sizes Standard Feature Option
7′ L x 80″ W (fits short box, single wheel box delete trucks) Available
8′ 6″L x 80″ W (fits long box, single wheel box delete trucks) Available
9′ L x 80″ W (fits 60″ CA, single wheel cab and chassis trucks) Available
9′ L x 94″ W (fits 60″ CA, dual wheel cab and chassis trucks except Dodge) Available
9′ 2″ L x 94″ W (fits 60″ CA, dual wheel cab and chassis trucks including Dodge) Available
11′ L x 94″ W (fits 84″ CA, dual wheel cab and chassis trucks) Available
12′ L x 94″ W (fits 84″ CA, dual wheel cab and chassis trucks) Available
Increase length of bed (up to 24′) Yes
Increase width of bed Yes
Flooring Standard Feature Option
.190 Aluminum smooth Yes
1″ Extruded flooring with built in I-beam supports Yes
1-1/4″ Extruded flooring with built in I-beam supports Yes
Hinged 14″ x 14″ gooseneck trap door (recommend factory mounting) Yes
Tie Down System Standard Feature Option
Heavy-duty 2″ rub rail .375 thick with 2″ x 4″ stake pockets on 24″ centers Yes
2000# Stainless steel recessed rope rings Yes
3500# Recessed swivel tie rings Yes
Tow-Rax tie down system on Yes
Aluminum E-track tie down system Yes
Frame Mounted Hitch Options Standard Feature Option
2-5/16″ Ball plate (recommend factory mounting) Yes
Drop hitch – tube type (10K cap.) Yes
Heavy-duty rubber cushion adjustable hitch Yes
Heavy-duty drop hitch – tube type (14K cap.) Yes
Electrical and Wiring Standard Feature Option
Enclosed electrical wiring with connections Yes
11 Sealed beam marker lights (9 on 80″ wide unit) Yes
Extra marker lights Yes
2 Sealed beam stop/tail/turn lights Yes
Extra stop/tail/turn lights Yes
L.E.D. light package Yes
2 Sealed beam stop/tail/turn lights and two reverse lights in headache rack Yes
2 L.E.D. stop/tail/turn lights and two reverse lights in headache rack Yes
L.E.D. Backup lights Yes
8 Ton electric hoist (Double acting)
Electric brake kit and wiring Yes
Side Options Standard Feature Option
Aluminum drop in side racks (7″, 14″, and 36″ tall) Yes
Extruded western sides 14″ to 7″ Yes
Drop in diamond plate tapered sides (12″ tapered down to 4″) Yes
Hinged sides Yes
.125 Welded dump sides (Double door in rear) 24″, 36″, and 48″ tall Yes
.190 Welded dump sides (Double door in rear) 24″, 36″, and 48″ tall Yes
10″ Tall extruded sides with end gate Yes
Above body boxes, upright side boxes, and underbody boxes of different sizes Yes
Recessed aluminum fuel intakes Yes
16″ Deep side skirting Yes
Rolled fender flares Yes
Misc. Options Standard Feature Option
17″ Tall .125 Diamond plate bulkhead built into headache rack Yes
Expanded mesh for headache rack window Yes
2″ x 1/4″ flat bar louvers welded into headache rack window Yes
Name:*
E-mail:
Subject:
Message: